Octoprint default ssh password

OctoPrint on a Galaxy S6 – SomeKev

Log into your Pi via SSH (it is located at octopi.local if your computer supports bonjour or the IP address assigned by your router), default username is pi, default password is raspberry Hello, I have totally forgotten the username and password for the Pi itself rather than the Octoprint user....So I'm able to use Octoprint, just not SSH into it to make some needed changes. Is there a way I can reset it rather than a full reinstall? I tried opening the file 'cmdline.txt' and add 'init=/bin/sh' to the end. But it did not boot to single user mode to sign in as su and reset the.

Using SSH. The Octoprint image which you flashed has SSH (Secure SHell) enabled by default. SSH is a way to have remote command over a device. Make sure the RPi and your computer are connected to the same network and use the credentials below. Default username: pi Default password: raspberry. On Windows Problem: For some reason, it seems when I've removed power and plug it back into the RPi, OctoPrint fails to start and when I try to SSH into it, it will not accept any password What I've done: The only thing I can do is re-flash and start from scratch Additional Info: Flashing latest OctoPi 0.15.1, running on a brand new RPi 3B+; Only 3 plugins installed: OctoLapse, OctoPrint Anywhere, and.

SSH into the user running octoprint, then run $ grep salt .octoprint/config.yaml. You wil get salt: SomeString as a response. Copy that string then run: echo -n MyNewPasswordSomeString | sha512sum. You will get the octoprint-internal hashed password. Copy it, edit .octoprint/users.yaml and replace the password for the desired user First up, let's ssh into the Octoprint server. The default password is raspberry If you know your username and password, GREAT! If you don't, the default may be in the manual or on the side of the router. If you can't find the manual/not on a sticker, try googling your model with the default password. If the default doesn't work, you may be out of luck unless you do a hard reset to bring everything back to stock If your left the default username (pi) and the default hostname (octopi), you should have entered ssh pi@octopi.local (but you actually entered ssh octopi.local) The plain octopi.local is what you would use as the URL to access the OctoPrint web interface from a browser, not to ssh into OctoPi

Trying to update OctoPrint on OctoPi 0

1. power off the pi, remove the MicroSD card, and put that in a PC. 2. Then in the drive called boot, create a file named octopi-password.txt. 3. In that text file (octopi-password.txt) you only need the password you want to set for the pi user, nothing else. So it will be one word only in this file The user name and password octoprint asks for are the ones you created when you went through your first run experience. And in particular are not the pi user and password you use to ssh into the pi (and you shouldn't use the same user name and password for both either). ), Powered by Discourse, best viewed with JavaScript enabled, Access. When I set the tool temp in Octoprint, it often doesn't register. This includes setting it manually under target, in the pull down using presets, or when executing load and print. The bed temp will set and start heating but it won't set the new tool temp and doesn't start heating. I can set it manually on my ender 3 V2 which Octoprint will. Then ssh'ed to the Pi and logged in with user pi and the password set up in the file. At that point, if the password to the server needs to be reset, it can be done using the other method of deleting users.yaml and changing the firstrun to be true in config.yaml Open a browser and enter the IP of your OctoPi instance then click Next to begin the OctoPrint Setup. Enter a username and password to secure your OctoPrint instance, click on Keep Access Control Enabled then click Next. Choose whether to Enable or Disable Anonymous Usage Tracking then click Next

Log into your Pi via SSH (it is located at octopi.local if your computer supports bonjour or the IP address assigned by your router), default username is pi, default password is raspberry. Change the password using the passwd command. You do not need to expand the filesystem, current versions of OctoPi do this automatically The first step is to set the Octoprint password to prevent anyone from having anything printed on your 3D printer. Enter the username and password you want to use, then click on Keep Access Control Enabled, then follow Next. The next step allows you to choose whether you want Octoprint authors to be able to collect statistical data

Don't forget to change the default password! level 2. 3 points · 5 months ago. While it is a good idea to change the default password for ssh access, raspi-config will not let you configure OctoPrint to use access control like OP asked Connecting to OctoPrint via SSH. Furthermore it will ask you for the default password again, so type in default password of raspberry all lowercase followed by the enter key. A new menu system will be displayed, and the first option is Change User Password. Press the enter key Octoprint is an extremely convenient way to manage your 3D printer. An easy way to accomplish this is with local SSH tunnels. Change the default password for the pi user. Posted by chris July 22, 2018 September 30, 2019 Posted in 3d printing, smartthings Post navigation Out of the box OctoPrint is compatible with most of the available consumer 3D printers.And its powerful plugin system allows extending its functionality in various ways. To name a few: Visualize your bed leveling via Bed Level Visualizer.; Create stunning timelapses that seem to just grow out of the print bed using Octolapse.; Completely control the themeing of OctoPrint's UI with Themeify What is the default SSH username/password for OctoPrint . root@ServeurNAS:/dev# chown Docker:Docker ttyACM0 root@ServeurNAS:/dev# ls -la |grep ttyACM0 lrwxrwxrwx 1 root root 20 Feb 17 19:16 ttyACM0 -> /dev/bus/usb/001/001 . Je crois que je vais laisser tomber Edited February 17 by vlotho. Quote; Share this post. Link to post Share on other sites

Raspberry Pi Touchscreen Octoprint Controller | Daniel

OctoPrint.org - Download & Setup OctoPrint

Une fois connecté en SSH, lancez la commande sudo raspi-config, choisissez « Change user password », et entrez le nouveau mot de passe à utiliser. Une fois le mot de passe modifié, nous allons pouvoir finaliser l'installation d'Octopi. Configurer Octoprint

Click 'Enable SSH' Step 5. A pop-up will tell you that SSH is enabled SSH Credentials. Host: The IP or Hostname that you use to connect to your printer normally Port:22. Username: pi. Password: your serial number, all letters capitalized You can use any SSH terminal application like Putty, Chrome SSH, or the Mac Terminal. M =password-della-tua-wifi} Fai la stessa cosa indicando anche il vostro paese di provenienza. Se fai caso, di default, scorrendo il file in basso, è decommentata la riga relativa a Unite Kingdom; non fate altro che commentarla aggiungendo un # davanti. # Uncomment the country your Pi is in to activate Wifi in RaspberryPi 3 B+ and.

Forgotten username and password to SSH into Pi - Get Help

Prusa Knowledge Base Octoprint - Configuration and instal

  1. Uncomment the WPA/WPA2 secured section and add the network name and password. At the bottom of the file, uncomment the line with your country (probably US). Setup . Insert the SD card into the Pi and connect it to a decent power supply (at least 2 A, preferably 2.5 A). Log in via SSH: (default password: rasberry
  2. The SSH (if you have installed OctoPi, or Raspbian, the is pi by default) The SSH password (the password for pi, by default it is raspberry but I advise you to change this password ) The port * (optional in LAN, the default port 22 will be used because it is the default SSH port - but this field requests a value in a distant access (WAN)
  3. In the Login prompt, you need to enter the credentials for OctoPi. The default user is pi and the password is raspberry. Please note that the password will not be shown when typing. If you changed the SSH credentials when you installed OctoPrint, you need to use the new credentials
  4. All3DP is an editorially independent publication. Editorial content, on principle, can not be bought or influenced. To keep All3DP free and independent, we finance ourselves through advertising and affiliate revenues
  5. OctoPrint is an open source web interface for your 3D printer that allows you to control and monitor all aspects of your printer and print jobs, right from your browser. OctoPrint can run on a number of different systems and platforms, but it is most commonly run on a Raspberry Pi
  6. Default Username: ezpi Default Password: EzP1.Th3D; Default SSH Username: pi Default Password: EzP1.ssh; Per user request the latest EZPi Pro image does NOT contain a secondary for recovery purposes. If you lose your password you will need to re-image the SD card and lost passwords are not something we can recover

OctoPrint is not Running SSH won't accept password

  1. . password: SN of the IAP . you can use the serialnumber of any IAP in the cluster if you have more than one IAP
  2. The SSH server is installed by default and starts with boot on Raspbian for Orange Pi and Lubuntu for Orange Pi operating system. So in general, you don't need to install SSH on your Orange Pi. 1. If the SSH is not installed, you can install it using the command below
  3. Install OctoPrint-WebcamStreamer via one of these 3 methods, also in-depth explained on the official OctoPrint Installing a plugin page.. Open the plugin repository in the Plugin Manager's settings dialog, search for OctoPrint-WebcamStreamer and install with the Install button
  4. Now that you have decided to use SSH to connect to your Raspberry Pi, we advise you to change the default account password. Since all Raspbian installations come with a default account and password, it is easy for hackers to log into your device. To make your device less vulnerable, change Raspberry Pi's default password. 1

Password reset · Issue #1063 · OctoPrint/OctoPrint · GitHu

  1. To set up Wi-Fi in OctoPrint open octopi-wpa-supplicant.txt with a proper text editor, and find the section labeled: ## WPA/WPA2 secured #network={ # ssid=put SSID here # =put password here #} Replace put SSID here with your Wi-Fi ID, and the password where it says put password here
  2. Connectez vous en ssh (avec Putty par exemple). Le RasPi est joignable à l'adresse octopi.local si votre PC supporte le protocole bonjour, sinon, trouvez son adresse IP (sur le routeur ou la box, ou en tapant ifconfig sur Raspbian en ligne de commande. Pour ma part je lui ai attribué une adresse fixe sur la box, je le retrouverai toujours en
  3. The only other thing we need to do via SSH is to change the default password for the Raspberry Pi. The easiest way to do this is via raspi-config so simply run the following command. sudo raspi-config; Select the first option and set your new password; Connect to OctoP
  4. The password value is the password associated to your session on your Raspberry Pi. If you have not changed the default Raspbian (or OctoPi) password, the value is raspberry The port for the distant SSH sessions is optional. The port 22 will be used by default if you are connected to your local network
  5. es the ssh port, filters using the sshd parameters, parses the /var/log/auth.log for malicious activity, and allows six retries before the detection threshold is reached. Checking the default.

Octoprint Shared Folder - Tech Blo

A Step-by-step Guide to Set Up Port-forwarding for

  1. I have started modifying my own 3D printer and one of the mods is a WEB interface. To have the WEB interface, the printer is connected to its own WEB server which runs Octoprint. Octoprint is an open-source project which is intended to allow 3D printing without a host (regular PC) connected to the printer. Read more Installing OctoPrint on OrangePi Zero (part 1
  2. g. Of course you will want to be able to SSH from within your own network, for example: sudo ufw allow from to any port 22 proto tcp. For the sake of this tutorial you probably want to enable web access from the wider internet
  3. Change the default password, enable SSH, get on to your wifi, etc. Once raspbian is running and secured on your Pi3 you can proceed with this guide. This user will be used to run both the backend and the frontend of octoprint: adduser --disabled-password --disabled- --gecos octoprint usermod -a -G cdrom,audio,video,render,plugdev.
  4. octopi ssh connection reset, I looked in the ssh config file and I can see that the only allowed users over SSH are root and sshd. Problem : as I never changed the root passw I asume it has the default one. I wonder if I enable SSH access from the web to my EX2 how long will it take for some one that knows the default password for root to break in my EX2
  5. Using sudo passwd changes the root password. I don't remember if root s via SSH are off by default, but I think they are. You should not permit root s as a security measure. - Steve Robillard Jun 23 '17 at 17:2

First the actual user will be created. The password can be a random string, since the account will be locked and the password disabled anyway. # adduser octoprint # passwd -l octoprint # usermod -a -G dialout octoprint. After executing these commands, there should be a /home/octoprint directory and some basic (hidden) files in it 2 (I am a Linux user and therefore I use the appimage), when making the updates of the plugins, the connection for the octoprint does not appear. Connect to RPi (ssh [email protected]) and change the default password for pi PrintrBot upgrades for OctoPI. Also using the printer console require some time to go on the stop Using putty or your favorite ssh client, connect to your raspberry pi using the same ip address that you use to access Octoprint. The default username is pi and password is raspberry.. First thing I would do is verify that the relays respond correctly. In order to do this, issue these commands . gpio -g mode 18 out gpio -g mode 23 out gpio -g write 18 0 gpio -g write 23 0 gpio -g write 18 1.

Can't SSH into a clean OctoPi/OctoPrint install

So i Setup my Raspberry and Tried to SSH into the Pi. When i connect to the Host using x ip address on Putty i get the terminal to input my User, Lets call it MyPi and when prompted to enter the password i get an access Denied issue Using SSH from a remote machine, I logged into the the default user pi account. Then, I added a new user with sudo rights using adduser and visudo commands. At the local PI 2 machine, I was able to log into a graphical session using the new user name and password. However, the original PI user name still didn't work Mais c'est sur un Raspberry Pi qu'Octoprint est le plus intéressant. La petite taille et la faible consommation de ce mini-PC permet de le laisser allumer durant les longues heures nécessaire à l'impression des pièces en 3D. Octoprint est le nom du projet qui a été démarré par Gina Häußge, alias fossel sur GitHub To be more exact, it is actually possible to change the lost password of your Raspberry Pi. Step 1: Prerequisites to recover the password of your Raspberry Pi. To be able to change the password of the Raspberry Pi when you forget it you will absolutely need the following things, impossible to do without: Physical Access to the Raspberry Pi; A.

This took us a little bit longer than we expected because our network has a hidden SSID, this is how it was configured: First ssh into the Raspberry, remember Octopi is based in Raspbian so we will follow the usual username and password pi and raspberry respectively: ssh pi@octopi.local Once you are logged in as pi then edit the /ect/network. Octoprint will try to connect to the Internet regularly as indicated in Check interval . It is advisable not to set an excessively low value, or it will reduce unnecessary bandwidth and increase the use of the CPU of our Raspberry Pi. By default, Google's DNS ( are configured, you can change them if you wish Login and open with a right click a terminal. If you enter commands in that terminal or over a ssh connection makes no difference. Now you are logged in as user pi. For security reasons, you should change the default password to something only you know. To change the password, use the passwd command. When finsihed, you can log out (ctrl+D) OctoPrint makes 3D printing easy and manageable. Learn how to install it on a Raspberry Pi with this step-by-step setup guide Hey guys Aidan here from Core Electronics and today we're going to be looking at setting up octopi and the Octoprint print server for a Lulzbot Mini 3d printer now if you've seen a lot of what we knew before you'll know that it can only print using a USB tether there's no SD card printing available on the Lulzbot Mini so what we're going to do is set up OctoPi which is a Linux distribution.

Video: Fixing lost passwords in OctoPi - My Stoopid Stuf

octopi default password

Appena loggati compariranno una serie di scritte. Fate attenzione alla dicitura Access Octoprint from a web browser [] in quanto vi sarà scritto l'indirizzo IP del vostro Raspberry. Prendetene nota! Dopo il con SSH, procediamo cambiando la password di default per garantire sicurezza al nostro sistema $ update-rc.d ssh enable. This command lets you start a service on the system boot. If you want to stop the service just use. $ update-rc.d -f ssh remove. These commands are only useful for services. Here -f is used to delete the symbolic link. If you want to start any other command or script, edit the /etc/rc.local file using. $ nano /etc/rc.loca Wenn ihr euren Raspberry Pi einrichtet, werdet ihr irgendwann nach einem Benutzernamen und Passwort gefragt. Hier gibt es den Standard-Login

How do i enable a ssh connection to octoprint? : octoprint

7.6.2. Default Printer Profile - Print bed & build volume. Choose a Circular Form Factor for a delta printer such as Anycubic Kossel Origin - Center Heated bed if you have one Fill in your bed diameter - usually 230 or 240 mm Fill in Z height - usually 300 mm Click on Next. 7.6.3. Default Printer Profile - Axes . Fill in desired. In the terminal ssh to the Pi using the command: ssh pi@octopi.local The default user for OctoPrint is 'pi' and the default password is 'raspberry'. Change the password of the pi to something that is secure and you can remember. Changing the password is done using the command: passwd For a network named JoesWiFi with a password of 12345, it should look like this: ## WPA/WPA2 secured network={ ssid=JoesWiFi =12345abcde } Connect to your OctoPi / Raspberry Pi. Use a terminal and connect to your OctoPi. ssh pi@octopi Appropriate Text Editors . Use sudo to be sure you can save the changes. vi / vi To make managing my gcode on my Octoprint server easier I have setup Samba and shared the uploads folder over my home network. Follow along if you want to do likewise. First up, let's ssh into the Octoprint server. The default password is raspberry. ssh pi@IP.OF.OCTO.PRINT. Now we need to update the package manager and install Samba

SSH into your Octopi account using PuTTY and the IP address that you found in the above step. The username is ' pi ', and the default password is ' raspberry '. After logging in, change the default password by typing ' passwd ' and following the prompts OctoPrint will present you with a first run Wizard, asking you to setup a username/password to use when interacting with the system via your browser, and configuring basic parameters of your 3D printer. Create the username and password; OctoPrint will tell you it's optional, but it's just smart system security to do so If OctoPrint is running on a Raspberry Pi (3B minimum): ssh pi@<raspberry_ip> sudo apt update sudo apt install vlc VLC will be used to transcode the rtsp stream to a http stream which OctoPrint can use as streaming URL. nano http_stream.sh paste the following line

Getting started with OctoPrint. Hey everyone, Tom here, and by now, you probably know what OctoPrint is and why using it is better than sacrificing an entire computer just for running your printer. But OctoPrint is pretty rapidly evolving, thanks to Gina Häuge's and BQ's commitment to the software, so my 2014 guide for setting it up is kind of outdated and, frankly, incorrect at this point Tested with OctoPrint 0.16.0. Original source: OctoPrint forum. Search. Categories. 3D printing (3) Algorithms (6) Allgemein (50) Android (1) Angular (8) APIs (2) Arduino (4) Audio (5) Bioinformatics (23) Boost (7) CAD (1) Calculators (23) cloud-init (1) Container (80) Docker (58) Kubernetes (10) LXC (11) Portainer (3) Cryptography (8) Data. Thingiverse Groups Prusa i3 General Forgotten admin password with RPi 2 and OctoPrint...? Forgotten admin password with RPi 2 and OctoPrint...? Please Login to Comment This is the default , which I'm pretty sure I changed. Just in case I tried it, and no luck so I must have changed it The default user is pi, and the default password is raspberry (but hopefully you changed this). The plan is to use SSH to allow us to connect to the Octopi without having a mouse, keyboard, and monitor connected. Right now, the SSH is enabled, so I can connect to my Octopi by typing ssh pi@octopi and being prompted for my password

Help! I lost my octoprint password!:41106 - General

OctoPrint is a great tool for managing your 3D printer(s). Using OctoPrint you can control your 3D printer from the network and allows you to monitor your printer's current status and print progress. In this guide we will cover how to install and use OctoPrint on a Raspberry Pi. Here are the steps to installing and using OctoPrint for 3D. SSH and Configurations. Once you are connected the default username and password are: pi/raspberry once you are logged in you can either run the passwd command and simply change your password to something different. OctoPrint Access

Network Controlled 3D Printer using OctoPrint and Raspberry PiOctoPrint Baby Stepping - Enable Live-Z Probe Offset | 3D

Install OctoPi On Raspberry Pi - OctoPrint Install Guide

It is better to install latest python version in a virtual-environment and install octoprint in the same venv.(future octoprint version or klipper might need newer python version) 1.Change user shell from sh to bash, and close and restart your ssh session Log into your Pi via SSH (it is located at octopi.local if your computer supports bonjour or the IP address assigned by your router), default username is pi, default password is raspberry. Run sudo raspi-config. Change the password via Change User Password

Mac/Linux: ssh pi@v1pi.local. If you can't get ssh to work, you can also log in using a keyboard and monitor. The default username is pi and the default password is raspberry; Change the password by running the passwd command. There is no root password set, so you don't have to change it. Any super user actions can be done as pi with the. SSH uses an encrypted network, so it doesn't send your password as plain text. More advanced users can control the encryption keys, using ssh-keygen. For now, we'll look at setting up and using secure shell. Step 1 Activate SSH in Raspbian. For security reasons, Secure Shell is not turned on by default in Raspbian octopi ssh connection reset, Jun 30, 2020 · 2) SSh connection with Windows Powershell and command prompt. Now you can decide to use the command prompt or Windows PowerShell to access your Linux server via ssh. a) SSh with Windows Powershell. The Windows Powershell native tool allows you to remotely connect to a server via ssh. You just have to open it with Windows + r then hit the key Assuming you can access Octoprint on port 5001, go ahead and create new service files for each instance you want. For this article there are three, but remember- you need the Octoprint config directory (/home/pi/.octoprint1, 2, 3) for each instance, and you need to change the port number and working directory in each service file

Network Controlled 3D Printer using OctoPrint and Raspberry P

After connecting to the OctoPrint web page, follow the prompt to upgrade OctoPrint to v1.4.2 or later. After installing OctoPi and upgrading OctoPrint, it will be necessary to ssh into the target machine to run a handful of system commands. If using a Linux or MacOS desktop, then the ssh software should already be installed on the desktop OctoPrint was the way to go (in fact OctoPi which is a Raspberry Pi version of OctoPrint). Since OctoPrint is a Python program, it can be installed pretty much the same way on an Odroid-C2 or on an Odroid-XU4. OctoPrint is installed on the Odroid and accessed remotely using a web page (OctoPrint client)

Setup OctoPrint (Raspberry Pi) • A geek&#39;s lifestyle

Control a 3D printer remotely with the Raspberry Pi and

OctoPrint version tracking: Whether you want to track OctoPrint releases or every commit.Usually you want to select Release here which is also the default, unless you are a developer. OctoPrint Release Channel (if tracking releases): The release channel of OctoPrint to track for updates. If you only want stable versions, select Stable here which is also the default Setup OctoPi (US Edition) - OctoPrint on a Raspberry Pi 4 Replies First and foremost, OctoPi is a fantastic pre-built image for a Raspberry Pi (Model A, B, or B+) that is designed to connect to your 3d printer and provide a web interface to interacting with your printer, all using the simple and powerful OctoPrint software. 5 inch Wireless. So first we install Raspbian lite on some old SD card and do the basic configuration of the RPI. Connected to a monitor I complete the most basic setup before continuing over SSH and starting the project related configurations. set a new password; set the host name; set the WIFI country and settings; on the interfaces, enable the camera and the SSH Adds support for slicing via Slic3r from within OctoPrint. Slicer (1.2.7) A full-blown GUI-based slicer. Rotate and scale model; set layer height and other critical parameters. Temperature Failsafe (0.1.0) OctoPrint plugin to execute a shell command on temperature threshold violations. TouchUI (0.3.7


Enabling access control? : octoprint

If you haven't changed Raspbian's password from the default 'raspberry', now is a good time to do so. Click the Change Password button and enter a new one. Now click the Interfaces tab, and set the radio button next to VNC to Enabled. Click OK. A VNC button appears in the top right of the screen, at the end of the menu bar Login via ssh (eg. using Putty or ssh on the command line). The default user is pi and the default password is raspberry. Stop Repetier-Server by sending: sudo service RepetierServer stop; Now it's time to backup all settings and data. These are stored in the directory /var/lib/Repetier-Server and it's subdirectories

I recently ventured into adding a 3.5″ TFT to my LulzBot Mini. I already have OctoPrint running, but there are times (usually during filament failure events) I need to directly control the printer (heat the filament, move axis motors etc) Setting up Octoprint. The first thing I did was into the Raspberry Pi using ssh to change the default password. $ ssh pi@octo.local The first time I had to accept the thumbprint of the Raspberry Pi and then I could with default password raspberry. To then change the password it is done with the command sudo passwd. First type the. Aug 03, 2017 · Using the latest OctoPrint devel branch, latest CustomPiOS and latest OctoPi devel branches, the connection on port 22 is refused when this previously worked on a clean install of OctoPi: ssh [email protected] Now results in: ssh: connect to host port 22: Connection refused. Trying octopi.local instead of the IP also.

  • Procházky brno a okolí.
  • Snapback vs flexfit.
  • Salt n pepa letna menu.
  • Malé mušky v kvetináči.
  • Jak povolit rdp.
  • Kamenný obklad za televizi.
  • Petach tikva izrael.
  • Filmové modely aut.
  • Cropp trička damske.
  • Micro sd 256gb samsung.
  • David coverdale discography.
  • Dětské bavlněné kraťasy.
  • Obří lilie.
  • Soubor vakuol v buňce.
  • Akvária bazar.
  • Hry oblíkačky barbie.
  • Velikost dvd.
  • Lucie pudilová zápas.
  • Opar wiki.
  • Pískovcová skalní města královehradecký kraj.
  • Irni.
  • Cottage nebo tvaroh.
  • Planeta opic postavy.
  • Aaa auto rezervační poplatek.
  • Prechodova lista 120mm.
  • Značky hasičských aut.
  • Papoušek nádherný hlučnost.
  • Botnik krabice od bot.
  • Harmonická stupnice.
  • Zubni zrcatko vypouklé.
  • Sunshine superman donovan.
  • Festival mládeže medžugorje 2018.
  • Jak poznat alergii.
  • Psí hřbitov cena.
  • Te taoismus.
  • Anna nicole smith syn).
  • Dovolená jugoslávie.
  • David fiala zuzana fialová.
  • Zlaté grillz.
  • Kolář jiří.